9 Best desoldering wick for You in 2021

This is the ultimate buyer’s guide to the Best desoldering wick . We would recommend using Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick as it is one of the best products currently available in the market

Best desoldering wick Review :

Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

 in stock
4 new from $11.50
Free shipping
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins

Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker Used to Remove the Solder and Disassemble Electrical Components(9.84 ft Length)

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • 1.High-quality materials: The desoldering wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
  • 2.Geometric braid design: The solder wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
  • 3.Widely used: No-clean desoldering wick is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
  • 4.Easy to use: The desoldering braid wick is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wick (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.

American HAKKO FR301-03/P ESD Safe Portable Desoldering Tool with Precise Temperature Control °F /°C

 in stock
4 new from $266.99
Free shipping
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • Easy-to-use adjustable temperature control built into the handle
  • Easy-to-clean solder recovery chamber minimizes maintenance and reduces waste
  • Fast release tool for the quick-change nozzle system
  • Closed-loop sensor integrated heating system for improved thermal performanc
  • Compatible with lead-free solders

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size

Lesnow Solder Wicks,No-Clean Solder Wick,10ft Length 2 Pieces Desoldering Braided Wicks. Solder Removal Tool,Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work

TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08'' L 9.8')

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty :If you have any questions, please feel free to contact us at any time. Thank you!

MG Chemicals - 424-LF Desoldering Braid #2 Fine Braid Super Wick for Lead Free Solder, 0.05" Width x 5' Length

 in stock
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • For Unleaded solder
  • Great with conventional tin/lead solders
  • RoHS compliant
  • Use to remove Unleaded solder during circuit repair
  • Specifically designed for high temperature, Unleaded solders

MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green

 in stock
2 new from $7.95
Free shipping
Amazon.com
as of February 26, 2022 10:33 pm

Features

  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • High purity, oxide-free copper
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • Environmentally and PCB safe residues
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209

Important notes when buying desoldering wick

There are some things you should consider when buying a desoldering wick. We spent 22 hours researching the most important things you should consider when buying a desoldering wick. So should we start with the list of things you should consider?

1. Budget and price matching

Make a list of the things you want in your desoldering wick and the price you are willing to pay for it. So try to look for a product in that price range and choose the one that appeals to you the most. One tip we would like to give you is: don’t settle for a cheaper product if it doesn’t even have a function you need.

Most desoldering wicks fall within the price range of $ 3.99 to $ 3.99. Therefore, if budget is not a problem and you want the best product for your needs, we advise you to choose the Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick.

If you want something medium range, choose American HAKKO FR301-03/P ESD Safe Portable Desoldering Tool with Precise Temperature Control °F /°C. If you have a very low budget, you can choose the one that is the TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08” L 9.8′)

2. Does it have all the features you need?

Most importantly, the desoldering wick you are purchasing should have all the features you are looking for. In case you don’t even have one, don’t buy! We are saying this because you will not be able to use it for that purpose. If you are a person without budget problems, I would suggest you to choose the best model which is TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08” L 9.8′)

3. The brand

Buying the desoldering wick from a reputable brand can actually make sense. Not only will it be better than others in terms of “build quality”, but it will also have some extra features, better customer support. Famous brands have multiple service centers across the country, so if you have any problems you can simply take your desoldering wick to one of their service centers.

4. Warranty Matters!

When you buy a desoldering wick from a well-known brand, you will get a guarantee. Low-cost products also come with warranties, but the claim process could be tougher. That’s why I always suggest you buy the product from a reputed brand and the one that comes under warranty. It will save you from repair costs in the future. On average, around 21% of people end up paying 40% of the product price for the service! You can save on service costs if the product is under warranty!

5. Check out our website

On our website we have experts in all categories and no matter what the product is, we have a better review or list about it. The products on our list are based on expert picks, advice and hours of research. That’s why when you buy something that’s listed on our best list, you won’t regret it. However, there is a possibility that we may not have covered the product you might be interested in, but if you come across something like this, please let us know via comments or contact us.

FAQs

What is the best desoldering wick?

The best desoldering wick is the one that has all the features that meet your needs. I think the best is Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick

Are there any good deals on desoldering wick?

In the offline market, you won’t find many offers. However, I have chosen the best desoldering wick and have added links to Amazon which has deals and deals running on a regular basis.

What is the cheapest desoldering wick?

Although most of the cheaper desoldering wick do not have many features, but if you are looking for the best one at a low cost, my best bet would be on TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08” L 9.8′)

Where can I buy the desoldering wick?

There are several places where you can buy it, but in my opinion, when it comes to the online marketplace, I wouldn’t recommend anything other than Amazon. It’s because their service is great!

Why should you trust our website?

We have been in the review business for more than 15 years and our motive is to help people buy the top rated products at the best price. We went through 22 to help you find the best desoldering wick

Conclusion

We hope you liked the desoldering wicks that we have listed in our best list. If it was helpful, bookmark our site and share it with people you know whenever they intend to buy something.
To conclude this guide,

  • If you are looking for the best desoldering wick: you should consider the idea of Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick
  • If you want the one that has similar characteristics to the best, then you should consider NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098″ Width, 10′ Length
  • If you want a desoldering wick that is “value for money”, choose Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker Used to Remove the Solder and Disassemble Electrical Components(9.84 ft Length)
  • If you want the cheapest desoldering wick, then TOWOT Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid(W 0.08” L 9.8′) should be the best for your needs!
  • Updated: October 25, 2021 — 2:13 am